Call us 01709 838188 or Get in Touch
8-10 week supply & installation lead time
10 year warranty, 60 year life expectancy
Designed by you, made to measure by us
98% of our customers would recommend us
Whole window U-values as low as 0.8W/m2K
We carefully choose all our components and finishes to ensure they are of the highest quality and will stand the test of time requiring minimal routine maintenance. This easy-to-follow routine maintenance guide offers step-by-step instructions on how to look after your windows and doors after installation.
For further guidance on routine adjustments, check out the Bereco Adjustment Guide
Teknos Clean and Care sets have been specially developed to care for the factory-finished coating of your Bereco windows and doors. They restore shine to dull and weathered finishes on both hardwood and softwood, can increase the time needed before first redecoration, and will also maintain the all-important timber and finish warranties we offer.
After cleaning, apply the TEKNOCARE 4250 solution with a clean lint-free cloth. Work the product gently into the frame to restore the shine and to restore the water-repellent properties of the coating.
NB: The product is delivered ready for use so no dilution is needed.
A concentrated, alkaline cleaning agent for removal of dirt and grease from painted surface.
A water-based product to restore the sheen on lack-lustre exterior wooden surfaces
After cleaning, if localised peeling or flaking, surface damages or cracks are found that have broken the coating, the affected areas should be repaired as follows:
NB: Allow the cleaned areas to dry thoroughly before undertaking any coating application.
Apply a single layer of basecoat using Teknos Aquaprimer 5200-1 for opaque painted finishes and Teknos Aquaprimer 2900 for translucent stained finishes.
Mix any paint or stain well before use and check it’s still within its expiry date before applying (our paint has a shelf life of 18 months).
Use an angled makeup sponge to apply the paint or stain rather than a brush to avoid over-application and to ensure a smooth and even finish.
Use a hairdryer on a medium setting to speed up drying time between coats.
Bereco timber windows and doors come with high-security espagnolette locking mechanisms and corrosion-resistant fittings and while most are self-lubricating and treated prior to delivery, they do require some regular cleaning and maintenance to ensure optimum product performance and durability.
It is essential that the running track for both folding doors and patio doors is kept clean and clear from debris in order to ensure trouble-free sliding and locking. In addition to cleaning we recommend the track should also be lubricated with an acid-free non-resinous grease or oil regularly in 6 to 12-month intervals.
See our folding doors installation guide for further guidance on maintaining your Bereco Folding Doors. www.bereco.dev.plx.mk/customer-care
Hinges should be checked annually, cleaned of dirt and debris and lubricated with an acid-free non-resinous grease or oil. Espagnolette locking points should be also lubricated every 12 months.
When fully factory finished and installed correctly, your vertical sliding sash window should operate smoothly and be virtually maintenance free. If the windows are not opened for a long period of time then it may be necessary to lightly grease the fastener(s) and restrictor mechanism with an acid-free non-resinous grease or oil as well as using a light application of silicone spray in the balance channel on windows operated by spiral balances.
All movable parts including hinges, locking rollers, cams and other fittings should be lubricated with an acid-free non-resinous grease or oil annually.
Face-fitted elements like door handles, letter plates, door knockers and numerals should be cleaned every 6 months to reduce the possibility of corrosion and tarnishing of the finish. Each item should be cleaned with warm soapy water and then dried with a soft lint-free cloth to avoid scratching the finish.
In coastal locations, and where windows and doors are installed in swimming pools, we recommend the application of a corrosion preventative after cleaning, taking care to avoid the timber and its coating.
Please refer to the manufacturer’s guidelines received at the time of delivery before undertaking the cleaning and maintenance of any fittings and ironmongery.
Re-decoration is simple to do and you don’t have to remove the entire coating in order to do so. The factory finishing of our windows ensures the longevity of the timber. The key is simply to replace any erosion of the coating with new layers.
There are a number of factors that affects when you need to carry out the first decoration. This includes the location of your home and the level of exposure to the elements and weathering that your windows and doors experience every year as well as the coating chosen (opaque painted or translucent stained). As a guide, we anticipate it will be between five and 10 years.
Cover the work area. Taking care to avoid getting paint on the glass and fittings.
Clean all window and door surfaces using Teknoclean 1956-00 solution from our clean & care sets.
NB: Do not use the care solution when redecorating as this may affect the adhesive of the coating.
Remove sashes and door leafs where possible for ease of application in corners and to prevent painting the windows shut.
Key the surface of the coating by using a p250-grade sandpaper. Once sanded clean the area with warm water and a lint-free cloth or sponge.
NB: Allow the cleaned areas to dry thoroughly before undertaking any coating application.
Apply two coats of Teknos Aquatop 2600, in the appropriate colour and gloss level. Allow a minimum of one hour between coats for drying. We recommend that a minimum of two coats are applied but further coats may be needed to sufficiently cover the area.
We recommend using only our approved Teknos Clean and Care sets to care for the finish of your windows and doors many cleaning products contain ammonia – a corrosive agent that can cause damage to the glazing and the coating.
We recommend using only an experienced tradesperson when undertaking the removal of the silicone surrounding the glazing as this creates a watertight barrier between the glass and frame.
We recommend using only an experienced tradesperson when undertaking the removal and replacement of the silicone surrounding the window frame as this creates a watertight barrier between the window and the building.
The optimum temperature for application of our paint and stain is between 5°C to 18°C so we would recommend doing any redecoration in spring or early summer.
The colour of your windows and doors can be found on the specification pages of your order confirmation. It will start with the prefix of either RAL, BS, NCS or if you opted for a Farrow & Ball colour-matched paint the Farrow & Ball colour code and name will be detailed on your order.
If you are unsure please get in touch with us via email at customercare@bereco.dev.plx.mk or via the live chat icon on our website www.bereco.dev.plx.mk.
We recommend that you use only the Teknos coating system so we can continue to offer a warranty on your timber windows and doors.
Typically, one litre of Teknos Aquaprimer will cover a surface area of up to 8 metre squared and the Teknos Aquatop 2600 topcoat up to 6 metre squared.
We can order any additional paint or stain for you and have it delivered to your door within 3-5 working days. To order more paint or stain please call our offices on
01709 357082 or email us at parts@bereco.dev.plx.mk.
You can use a glass protection film to protect the glass during redecoration but we recommend that any protection is removed immediately after completion and left on no longer than two weeks. We do not recommend the use of any adhesive tapes on either the glazing or coated surfaces of our windows and doors.
Your windows and doors are designed to last 60 years and we know that taste and trends change so don’t be afraid to change with them. We can colour match any RAL, BS, NCS or Farrow & Ball paint colour, so if you fancy a colour change for your windows and doors just tell us the colour you would like to match on ordering.
Our glass is not bonded into the frame like it often is with uPVC, so our windows and doors so can be easily re-glazed. If you need to replace the glazing at any time, we recommend using an experienced tradesperson to do so.
Whether you’re a homeowner working on a renovation project for your home, an architect looking for specific windows and doors, or a trade professional building new homes and properties, we offer a tailored service to help you budget, design, and order bespoke timber windows and doors.
HomeownersProfessionalsOrder corner samples of popular products including stain, ironmongery and bars delivered straight to your front door.
Order Product Samplestest
hi please help with this
A really good company to deal with. Very helpful team of people from sales, technical support and delivery. Any time I called, I did not have to wait to speak to the right person and help was immediate. So not only great customer service but also terrific products, well designed and exact fit. Competitively priced.
Graham Roberts
I was very happy with Bereco’s service levels and the products are excellent, very good quality. I would have no hesitation in recommending them to others.
Simon Hazelton
Beautifully constructed windows which do the job perfectly. Handled Covid disruption effectively. Installation went smoothly. All in all a job very well done. Would recommend without reservation.
Phil
Visited the showroom last year and impressed with the finish and quality. Just as delighted with the windows and back door that we ordered. They look fabulous.
Linda
As a dedicated manufacturer of quality timber windows and doors, we are part of a number of specialist memberships and schemes. Check out the full list below.
We’re pleased to announce our brand has featured in several national magazines and publications over the years. Here are some of the most recent places our products have been showcased.
Sign up to our mailing list and be kept up to date with our latest news, promotions and inspiration for your next project.
